Keys + cards + airtag leather wallet (free pattern)

I wanted a simple wallet that would hold my day-to-day cards and keys, as well as an airtag. This post shares a downloadable PDF of the pattern I came up with.

The card side of the wallet with two levels of pockets.

The keys-and-airtag side of the wallet, all folded up.

With the wings open, the keys are accessible. The airtag is hiding in its little panel.

The airtag is inserted and removed through an opening in the panel’s side seam.

Wallet specs:

• Dimensions with wings folded in: approx 118mm * 70mm * 22mm.
• Easily holds an airtag, a handful of keys, and up to four cards.

Materials I used:

• Leather: 1.2–1.4mm-thick undyed veg tan leather. I used scraps left over from my barefoot boots, or the wallet requires one A4/letter-sized sheet.
• Thread: Mercerised crochet cotton from a charity shop, waxed before sewing.
• Snaps: Prym 15mm snaps, 2x front (the receiving end) and 2x back (the inserting end). Smaller snaps would also work fine.

Download PDF of the pattern and step-by-step instructions:

• A4 paper
• letter paper

Print the pattern page at 100% scale, and check the size of the printout using the scaling squares.

If you make this wallet, do shoot me an email and let me know how it turns out 😊